Part of The Matrix Lab — Free Suite of Online Tools & Solvers
Terms & Conditions • Usage Guidelines

Terms of Service

Last Updated: November 2026

1. Informational & Layout Planning Utility

The calculations, decimal-to-fraction conversions, running tape marks, and SVG visual representations provided by BalusterPlanner.pro are designed strictly as layout planning, estimation, and preliminary carpenter reference tools.

While our mathematical formulas are engineered to high precision, real-world construction conditions will vary. Users are solely responsible for verifying on-site field measurements, material specifications, and the legal building codes adopted by their municipal jurisdiction.

2. Mandatory Jobsite Field Verification

Actual jobsite variables—such as out-of-plumb posts, warped framing lumber, dimensional shrinkage of green pressure-treated wood, bracket mounting offsets, and structural deflection—directly affect picket placement.

Carpenters and DIYers must always dry-fit their pickets and measure the resulting clear gaps before permanent mechanical fastening.

3. Building Code Compliance

References to IRC Section R312.1.3 (the 4-inch sphere rule) and IRC Table R301.5 (200-lb concentrated load) represent common model code standards. State and local building authorities frequently amend, modify, or supersede these model rules.

BalusterPlanner.pro does not guarantee that any physical construction project will pass municipal inspection without independent verification by the builder.

4. Disclaimer of Warranties & Limitation of Liability

This service is provided on an "as is" and "as available" basis without warranties of any kind, whether express or implied. Under no circumstances shall BalusterPlanner.pro or its operators be liable for material waste, lumber damage, structural failure, failed building inspections, personal injury, or incidental damages arising from the use of this website.